Infrared Photography: Tips on How to Get Started
You have always wanted to try Infrared photography. You have been lead to believe that this can only be done using expensive IR cameras. Then this article is for you ! Read how you can build yourself a digital IR camera for just a few dollars.
“Infrared in Sykesville, MD” captured by Sean Naber (Click Image to See More From Sean Naber)
Notes to the reader:
This article covers some of the basic principles of IR photography. It also tells the story of a project involving the modification of a number of digital cameras. The cameras were converted to be used as IR cameras. The aim of the project was to do the IR conversion as cheaply as possible.
Important disclaimer – Taking apart a perfectly good, fully functional, digital camera, is risky in more ways than one. There is the possibility of electrocution (through highly charged capacitors within the camera) and there is a real chance that the camera may never work again. I take no responsibility for any such mishap. The risk is yours completely; so are the rewards afterward if you get it right !
At the time of writing this, the NZ$ is worth about 70 cents American.
The trigger and the motivation
I am a simple man. I sometimes get involved in projects of a complex nature and may on the odd occasion fiddle with technologies which may be classed as “modern” or “advanced”. By nature though, I like to simplify things if at all possible. I also believe that many times we are precluded from doing worthwhile things by society telling us that “It is difficult”, “It is too expensive”, or “You will never be able to do that. Only certain people can do that and you are not one of them”.
In this article I aim to prove to you that you too can do IR photography. In fact, you can produce stunning IR photos using a home-built camera on a very tight budget if: ·
- You are prepared to invest a very modest sum of money in getting together the parts needed.
- You have the practical skills needed to take something apart and put it back together again (or know someone who can help you with that).
- You can cut and shape a small piece of glass (or get someone to do it for you).
- You have any knack at all for taking decent photographs.
- You are prepared to risk “getting it wrong” or “screwing it up”.
Photo captured by Ruel Tafalla (Click Image to See More From Ruel Tafalla)
Before you set off on this journey, you may want to get some more information on the subject. Fortunately there is a lot of information accessible on the Internet. If you wanted information on camera conversions you could go to:
(This article serves as a very good starting point for information on digital IR photography.)
(This is a very comprehensive article. Definitely read the paragraph on what makes a good IR camera.)
(Different cameras are compared here. You can also go to the page on digicam modification for detailed instructions on how to modify an Olympus 2040.)
(This article covers a whole raft is issues and contains links to many more resources.)
(This article contains instructions on modifications on a Canon G1. It has very well documented steps and photos.)
“Greenwich Park” captured by Sean Nel (Click Image to See More From Sean Nel)
In some instances the articles mentioned above will give you all the details needed to convert a specific camera. Some of them refer you on to other sites where once again modifications to cameras are described and detailed. Even if you do not intend to convert one of the cameras covered in these articles, it is worth the while to scan through them. You then get an idea of what a digital camera looks like on the inside and how they are constructed. You will learn a lot by just scanning through the articles contained in this list!
Some more information on IR photography (using digital cameras) can be found at: http://www.lifepixel.com/ and other similar sites.
You can also search the Internet for sources of your own using phrases such as:
- “Infrared camera conversion”
- “Infrared photography”
- “IR photography” etc.
If you do not have easy access to the Internet, you may go to a local library and ask about IR photography. Many libraries will only have books and references on IR film photography but you may be lucky and get info on digital photography from yours. It all depends on how modern and up-to-date your library services are.
I am going to assume that you have a basic grasp of the principles of IR photography. Even though you need not be an expert on these, I suggest you familiarize yourself with the following before you proceed with this article:
- What is infrared light, how does it differ from light in the visible spectrum, why is it we can not see it but digital cameras can ?
- How does a digital camera capture a picture, what is a CCD, what does a camera’s mega pixels(MP) value indicate etc.?
- What does a “hot filter” do and why is it found inside most digital cameras ?
- The manipulation of JPG-files on a personal computer, utilizing graphics software.
The mere fact that you are reading this article, tells me that you have an interest in IR photography. You may also be keen on taking your own IR photos and manipulating them. I take that to be a good sign and trust that you will “fill in the gaps” around missing information where and when needed.
From experience I can tell you that:
- You do not need a specialized IR camera costing hundreds (or thousands) of dollars to do IR photography.
- You do not need to use a digital SLR for infrared photography. A cheap digital camera that has been converted for IR photography can take stunning IR photos. It will most likely not suffer from long exposure times and can be utilized as easily as any other digital camera.
- It is not that difficult to convert a suitable point-and-shoot digital camera for IR photography.
- Suitable cameras and the materials needed to build your own dedicated IR camera can be sourced cheaply if you have access to the Internet and a reliable postal service. You may already posses some of the tools and/or may be able to get the components and tools in stores close to home.
“IR Queen’s” captured by Reza (Click Image to See More From Reza)
What you will need
You will need the following during the construction phase of your IR photography project:
- A suitable camera. There are numerous references to suitable cameras on the internet. You may want to read my comments on what I considered suitable cameras below. This will give you an indication of how I went about it. As you will most likely be buying second hand goods, ensure that the deal includes a memory card, charger for the battery (if applicable) and some software (good to have) for downloading the photo files. A carry case is good to have but not essential.
- A suitable IR filter. You will most likely be able to get this from a photography shop, photographic retailer or the like. If you are able to source goods over the Internet and can have it delivered to your home, you will not find it difficult to get a suitable filter. Consider buying at least two or three different filters. If you do, the filters should be spaced far enough apart (in terms of their respective cut-off points) to allow you to experiment with different lighting conditions, more or less Woods effect etc. Note that you may not only have to buy filters for use as filter elements, but you may have to buy some filters to cannibalize for their parts.
- Some basic tools. These include one or two jeweler’s screwdrivers, a glass cutter, a diamond-impregnated file, masking tape, a fine-pointed semi-permanent pen, tweezers and blu tack. You may or may not want to use vernier calipers to measure the glass element that needs replacing inside the camera. More about that later.
- A suitable workplace. The workplace should be clean, uncluttered and well-lit. It should preferably be set up such that you can leave the project there indefinitely while searching for, constructing or waiting for parts.
- A few consumables like paper cloths, cleaning liquid, epoxy glue, earbuds and a clean handkerchief or two.
- Enough time to complete the project. A typical build can take an evening or two of full-on work but may extend out to a week or two if you have to wait for delivery on goods which had been ordered
Some of the basic tools needed for the job
Infrared Photography Tools
You may not need all of the tools shown in the two photos. Most are cheap and easy to find.
Additional Infrared Photography Tools Needed
Once you have completed your camera you will need:
- A memory card suited to your camera. Some cameras have internal memory allowing you to store photo files on the camera itself. It is however always worth the while to get a memory card. The files are downloaded so much easier and the storage capacity is increased many times over.
- Batteries, a battery pack, or power source for your camera.
- If your camera allows for manual white balancing you will need a gray card to allow for this action. You need not spent lots of money on this; see notes later in this article.
- Suitable subject material for your photo shoot.
- Sufficient light and suitable weather conditions for the shoot.
- Means of getting the files from the camera on to the computer. You may transfer the information by means of a cable connection or by taking the memory card from the camera and slotting it into a suitable card reader. Consult the instruction manual for your camera for more information on how to do this.
- Access to a personal computer and suitable software for image manipulation. Once again this need not cost you a cent. You can download GIMP from the Internet and use it to process our photos. There are Gimpuser tutorials which teach you how to take a color photo and convert it to grayscale or how to change around the colors for false-color photography. You will basically be doing one of these two actions to convert your IR photo into a stunning work of art. See http://www.gimpusers.com/tutorials/infrared-monochrome.html
- A tripod is handy in that it allows you to take photos in poor lighting conditions.
Things to keep in mind about IR photography
- IR photography is as much an experimental process as it is an art form. You never quite know what you are going to get when you press the shutter release. You are for ever experimenting, always trying different things and you need to take lots of photos to maybe get the outcome you hoped for.
- IR photo’s need not be sharply focused, crisp and clear. In fact much of the allure of this art form is contained in its ghostly appearance, its dreamy atmosphere and sometimes surrealistic appearance. I will be referring to this later on within the article.
Things to keep in mind about digital IR photography
- Digital IR photography has very real advantages over IR film photography. The old IR films had to be treated with great care to prevent fogging and had to be developed by experienced photo laboratory staff or dedicated amateurs. It was not easy and it was not cheap. Digital photography and the process of producing an IR image of your own does not cost a cent. That is right ! Once you have modified your camera and added the bits needed to get it to do IR photography, the only real expenditure will be toward batteries for the film shoot. You can down-load your own photos, “process” them, and produce results without any real cost. This is especially important when you consider that you will be taking lots of photos to see which ones are useful and which ones are not.
Proceed to Part 2: My own Infrared Camera Project
About the author:
Pieter Albertyn is a self-confessed “tinkerer” and amateur photographer. He lives in Napier, New Zealand. Pieter has previously been involved in product development and systems engineering. He loves to modify utility products, enhance their features and develop basic logistical support systems for them. Though he works in an English dominated workplace, English is his second language.
For Further Training on Infrared Photography:
One of the best-selling photography eBooks on the market is marked down drastically for only 2 more days and covers how to do many photography techniques that produce unusual, eye-catching results (including extensive chapters on Infrared). Found here: Trick Photography Guide
Go to full article: Infrared Photography: Tips on How to Get Started
You must be logged in to post a comment.